There must be an engineering construction arrow board
at the time of road construction.
Sometimes on the highway, there is too much water on the road surface,
and the highway needs maintenance and repair.
Then this time also requires an engineering vehicle to guide the work.
and it is a dangerous work
A high-intensity, high-brightness safety indicator is required.
That is, the construction arrow light we are talking about today,
This is not a general energy-saving lamp, the brightness is very high, the warning effect is very good,
What is the visual distance of the LED arrow board .
This requirement is very high,
and it is best to see it clearly within one kilometer.
If it is under construction ahead , the arrow board under working
If the construction progress card is too low,
the driver will not pay attention at this time.
It may cause unnecessary losses, especially loss of life,
loss of life and property,
So the arrow board should have high brightness
How to install the highway construction arrow lights?
The installation method of highway construction is to use hoops.
Pull the back of the highway construction arrow light into the aluminum slot.
Then catch the vertical rod of the car from the back,
so you can use the hoop.
If you are looking for this LED arrow board
please contact us at fiona@wdm88led.com or whatsapp: 0086 13652406263
Post time: Mar-21-2019