highway Dual color P10 red green led module

highway Dual color P10 red green led module

P10 led display module (red and green)
Introduction of P10 display module (red and green):
P10 display module (red and green) uses 16*16 P10 module, one red and one green is one point, 16 points is the module height,

16 points is the module length, and the conventional display module is only 8 points. You can display numbers and letters, you

can display Chinese characters at 16 o’clock, and you can display two Chinese characters on a fast module.

Second, P10 display module (red and green two-color) parameter details:
1. Product size: 160*160*25MM
2. Lamp color: red, green
3. Lamp Bead Category: Taiwan Crystal Chip Lamp Beads
4. Number of lamp beads: 256 * 2
5. Yellow wavelength: 590-595NM
6. Working voltage: 5V
7. Working temperature: -40-60 °C
8. Humidity: 10%-95%
9. Protection level: IP53
10. Communication interface: RS232, 10M Ethernet
11. System Driver: Asynchronous Control System
12. Display mode: can be directly displayed, left, right, up, down;

Third, the P10 display module (red and green two-color) features:
1. The display P10 led module is the main component of the highway display.
2. The display P10 module adopts Taiwan wafer 14MIL chip, which has longer service life, good stability, high refresh rate and

high brightness lamp. Make the display picture more realistic and clear, make up for the lack of traditional quality text and dullness.
3, the display P10 module mask is our company’s exclusive mold opening, a lamp bead with a hole, the shell sealing performance

is particularly strong, uniform illumination, the appearance of cleaning is very convenient.
4, display P10 module in order to achieve better waterproof performance, using our unique process, the bottom layer of glue is

beyond the LED pin to achieve complete waterproof inside and outside. The whole surface is potted and the LED conductive pins

are completely sealed, so that the LED waterproof performance is optimal.

5. The surface shell and the bottom shell of the display P10 led module are connected by stainless steel screws. The stainless steel

screws have certain functions of anti-corrosion and anti-rust.
6. The outer casing of the display P10 module is made of PC material that is now UV-resistant. Full UV protection, wind and

rain for a few years without any problems, there will be no cracking phenomenon. PC is an amorphous thermoplastic resin with

excellent comprehensive properties. It has excellent electrical insulation, elongation, dimensional stability and chemical resistance,

high strength, heat resistance and cold resistance. It also has self-extinguishing, Flame retardant, non-toxic, colorable and so on.
7. The driving chip of the display P10 led module adopts the MBI5026 constant current driving source, and the best constant current

driving chip adopts one-to-one static driving, which makes the product more stable, longer lasting and longer in life.

If you are interested in our product,Please fell free to contact with us