600mm Single-Sided Through-Hole Lane Control Signal
The 600mm Single-Sided Through-Hole Lane Control Signal is a very common traffic signal used at toll booths. It features a single-panel, two-color display—a red X and a green arrow—to indicate traffic conditions to vehicles and pedestrians. This product is primarily used at highway toll booths and tunnel entrances, with one set of red X and green arrow canopy lights typically installed above each lane. The light has two display states: a red cross and a green arrow. It operates in only two modes: the red cross indicates “No Entry,” while the green arrow indicates “Proceed.” The red cross and green arrow lights emit a strong beam, allowing drivers to clearly identify them from a distance, enabling them to slow down in advance and guiding them to pass through the toll station correctly, safely, and smoothly.
1. The 600mm Single-Sided Through-Hole Lane Control Signal is primarily used at toll booths, tunnels, and similar locations. It features LED chips from Taiwan’s Epistar, arranged in a through-hole configuration. The LEDs are densely packed, delivering ultra-high brightness and excellent visual effects.
2. The 600mm Single-Sided Through-Hole Lane Control Signal housing is constructed from cold-rolled steel plates and welded together, providing excellent strength and wind resistance. The display panel features a double-layer structure, ensuring superior sealing and dustproofing, while also facilitating effective heat dissipation within the panel. The canopy light components are complete, securely assembled, and structurally stable, with smooth transitions at the edges and corners, free of burrs or rough edges;
3. The protective coating on the outer shell and connecting components of the 600mm Single-Sided Through-Hole Lane Control Signal display is uniform in color, free of scratches, cracks, or exposed substrate defects, and its physical and chemical performance indicators comply with relevant national and industry standards;
4. The 600mm Single-Sided Through-Hole Lane Control Signal is fully waterproof: waterproof sealant is applied at the junction between the display screen and the cabinet to enhance the product’s waterproof performance.
5. The 600mm Single-Sided Through-Hole Lane Control Signal undergoes rigorous aging testing: The product undergoes a 24-hour validation aging test prior to shipment, ensuring superior performance!
Parameter
| Product size | 600*600*82MM |
|---|---|
| Lamp beads Category | Taiwan chip lamp beads |
| Red wavelength | 620-625 NM |
| Green wavelength | 520-525NM |
| Service life | 100000H |
| Case material | Electrostatic spraying, sheet metal chassis |
| Operating temperature | -40° C-60° C |
| Protection class | Ip65 |
| Operating voltage | AC220V |
| Visual distance | >500M |
| Installation method | back holding hoop |
