Floor Tile Traffic Light
The floor tiles and traffic lights are made of polymer composite materials. They are coated with white glue, with the bottom filled with glue and the interior being solid. Therefore, rainwater cannot enter the product and it is absolutely sealed and waterproof. The front is treated with frosted anti-slip treatment, and there are thick spring plates inside. When a vehicle presses down, it will have a certain buffering effect, enhancing the load-bearing capacity, which can withstand 50 tons of pressure. The LED light board is directly inserted into the red and green light bulbs.
The zebra crossing floor tiles and traffic lights refer to a kind of signal indication when pedestrians pass through the traffic light intersection. It is displayed in red and green, and its display position is on the ground surface. The main installation position is on the zebra crossing. This way, people walking with their heads down can always see the traffic status, thereby reducing the occurrence of traffic accidents!
- The floor tiles traffic lights are auxiliary devices for the human-friendly design facilities of the city’s pedestrian crossing. They visually remind pedestrians not to run the red light and guide them to cross the road safely according to the traffic light signals; they help cultivate good civilized travel habits and ensure traffic safety; they reflect humanistic care and enhance the image of the urban roads.
- The floor tiles traffic lights are resistant to pressure, shock, and slip. They are made of special plastic and are excellent insulating materials. The surface is treated with sandblasting for anti-slip design.
- The floor tiles traffic lights are generally installed at both ends of the pedestrian crossing stripes; they can also be installed on the safety islands of the pedestrian paths, that is, in front of the first pedestrian crossing stripe. They are mainly for people and drivers to see, to beautify the urban roads, to enhance reminders, and to make “cell phone addicts” notice the status of the traffic lights and help them cross the pedestrian crossing safely.
- The floor tiles traffic lights have a high safety coefficient. The working voltage is DC 24V direct current. The floor tiles lights are synchronized with the voice prompt column or pedestrian lights, without delay.
- The back of the product is filled with white glue and then a rear plate is added for high heat resistance and complete waterproofing.
- The appearance is exquisite, with concave and convex designs.
- Pressure resistance: A single floor tile + base exceeds 48KG;
- Customization: Can be customized to any size;
- Removable: Comes with a detachable base;
- Low power consumption: The power consumption of the floor tile is less than 2.8W, no external pull wire is needed, and cost savings are achieved.
- High color rendering index: High color rendering index, soft and uniform brightness;
- Multiple waterproofing: Triple waterproofing, waterproof base, floor tile filled with glue, waterproof connector at the outlet;
- Simple installation: Used in conjunction with the red and green pedestrian lights at the intersection, easy to install and maintain;
- Installation guidance: From construction to installation at each intersection, 2 technicians are provided to accompany and guide;
- Long lifespan: The intersection is equipped with a 5MM thick steel slot to protect the wire,
- The service life is longer.
- One main line can be connected with 30 floor tiles;
- The installation angle of the floor tiles can be adjusted: Multiple angles are available, according to customer requirements (cutting in a square shape or at an angle);
- The length of the floor tile support can be adjusted: There are holes at both ends of the support, and a adjustable support is provided;
- Parallel installation method: The wiring method adopts the parallel hand-holding method;
- The wiring head is made of metal material;
Parameter
| Product Model | WDM-DZ-500*130-RG |
|---|---|
| Product Name | Floor Tile Traffic Light |
| Product Dimensions | 500*130*55MM |
| LED Composition | Circular Tubes with Diameter 5mm |
| Single Brick Load Capacity | 50t |
| Shell Material | High Molecular Composite Material |
| Rated Power | 5W |
| Working Voltage | DC24V |
| Control Method | Constant Current |
| Average Luminous Intensity | ≥8000cd/㎡ |
| Visible Distance | 20 – 300m |
| Operating Temperature | -30℃ ～ +55℃ |
| Relative Humidity | 10% – 95% |
| Insulation Index | >1500V |
| Ground Current | ≤3mA |
| Average Fault-Free Time | ≥10,000 hours |
| Service Life | ≥100,000 hours |
| Uniformity | Brightness Uniformity |
| Protection Grade | IP65 |
| Installation Method | Underground Installation |
