125MMUnderground Pile Light
The buried road spike lamp is composed of the light bulbs of the traffic signal and cast aluminum material. The front surface is made of transparent acrylic material, and the bottom shell is cast aluminum. The back of the internal lamp board is filled with transparent soft glue, so rainwater cannot enter the product interior and it is absolutely sealed and waterproof. The front surface is treated with anti-slip treatment. The LED is inserted directly, and its compressive strength is stronger than the surface mount light bulbs. Moreover, the light bulbs of the traffic signal are outdoor light bulbs, featuring high brightness, resistance to high temperatures, and extended service life.
The buried single red light refers to a type of signal indication when passing through a red-green traffic light intersection. It is displayed in red and its display position is on the ground surface. The main installation positions are on the zebra crossing or in front of the first zebra crossing, that is, on the safety island. The buried red light is installed at both ends of the zebra crossing, usually for drivers to see, and on the safety island, usually for pedestrians to see, so that people who are walking with their heads down can also see the traffic status at any time, thereby reducing the occurrence of traffic accidents! The illuminated state should be consistent with the pedestrian light.
Share This Products :
- The buried single red light is an auxiliary device for the human-friendly design facilities of Weide Mei for pedestrian crossing. It visually reminds pedestrians not to run the red light and to cross the road safely according to the pedestrian light signal; it helps them develop good civilized travel habits and ensures traffic safety; it reflects humanistic care and enhances the image of urban roads.
- The buried single red light is resistant to pressure, shock and slip. The shell is made of die-cast aluminum, and the surface is treated with sandblasting to prevent slipping.
- The buried single red light is generally installed at both ends of the zebra crossing on the sidewalk; it can also be installed on the safety island of the sidewalk, that is, in front of the first zebra crossing. Its load-bearing capacity exceeds 50t. It is mainly for people and drivers to see, to beautify the urban roads, to enhance the reminder, to make smartphone users notice the status of the red and green lights, and to help them cross the zebra crossing safely.
- The buried single red light has a high safety coefficient. The working voltage is DC 24V. The buried lamp on the safety island of the sidewalk synchronizes with the voice prompt column or pedestrian light without delay.
- The product is filled with soft rubber, has high heat resistance, and is completely waterproof.
- The appearance is exquisite, with concave and convex designs.
125MM Round In Ground Light
The 125 mm circular underground traffic signal light is part of the Smart Zebra Crossings Active Underground Signal System – a novel type of ground-based traffic assistance facility. Installed in pedestrian crossing zones, this device can synchronize its color changes (switching between red, yellow, and green) in coordination with the traffic signals at the intersection post; 125MM Round In Ground Light is commonly referred to as the “Ground Traffic Signal Light.” It is designed for low-visibility conditions – such as at night or in rainy or foggy weather – to provide bidirectional alerts to both pedestrians and motor vehicles, thereby reducing the incidence of traffic accidents at intersections. (As shown in the figure below)
125 mm circular underground traffic signal product functionality
Synchronized crosswalk signal guidance:This system is integrated with the existing traffic signal at the intersection, lighting up in sync with the roadside traffic lights: red light prohibits crossing, green light allows crossing, and yellow light serves as a flashing warning signal for switching between modes. By bringing the traffic signal functionality directly to the ground level, 125MM Round In Ground Light reminds pedestrians who are looking down at their mobile phones to obey traffic rules and reduces the incidence of running red lights.
Low-level lighting alerts the driver:The lighting is installed along the road surface at a lower height, providing a stronger visual impact; this makes 125MM Round In Ground Light easier for drivers to see the lights at night, during rainy weather, or under backlighting conditions, enabling them to slow down in advance and yield to pedestrians at crosswalks, thereby reducing conflicts between pedestrians and vehicles.
Multi-mode lighting alert function:Supports various lighting effects including continuous illumination, strobe, flowing flicker, and breathing gradient; during the yellow-light phase, high-frequency flashing serves as a strong warning signal; the device can be connected to an external human motion sensor to trigger an illumination alert when a person or vehicle is detected; 125MM Round In Ground Light enters low-power sleep mode at night when no one is present, and automatically activates high-intensity illumination when someone crosses the street.
wired/wireless synchronization control:Supports wired signal control device connectivity; optional GPS or 4G wireless synchronization solutions are also available, making 125MM Round In Ground Light suitable for retrofitting existing intersections without additional cabling installation;
The 125 mm circular underground traffic light effectively addresses the core pain points faced by customers.
The "Head-downers" often overlook the vertical pole signal lights.
Traditional traffic lights at elevated locations are often overlooked by pedestrians using mobile phones; this product positions its signal light within the pedestrian’s direct line of sight, providing an intuitive indication of the traffic status and helping to reduce incidents such as running red lights or reckless driving.
Poor visibility due to adverse weather conditions
In rainy, foggy, nighttime, or backlit conditions, overhead signal lights are easily obscured or their reflection may be difficult to discern; in contrast, ground-mounted high-brightness LEDs offer greater penetration and are easier to detect even from low viewing angles, effectively addressing the challenge of signal recognition in low-light environments.
Addressing the inconvenience of identifying special populations
For elderly individuals, children, or people with reduced visual acuity, monitoring high-mounted signal lights can be challenging; lower-mounted lighting provides a more intuitive and easily understandable warning, thereby enhancing safety when crossing roads.
Addressing the difficulty for drivers to anticipate pedestrians crossing the road over long distances.
The vertical pole signal light provides a relatively weak visual alert to drivers; however, the road surface lighting creates an immersive warning system that proactively reminds drivers of the presence of a pedestrian crossing ahead, encourages them to reduce speed and yield to pedestrians, and thereby lowers the risk of collisions between pedestrians and vehicles.
125 mm circular underground traffic light wiring instructions
Insert all three round underground stud power cord into the corresponding holes on the connector, then secure the three wires by fastening the clamps, tighten the connector, and finally seal 125MM Round In Ground Light with waterproof tape to prevent water ingress. One side of the connector can be connected to the studs, while the other side is connected to the power supply. (The power supply control box has an input range of AC 85–265 V, designed for connecting to signal lights, pedestrian lights, etc.; the red wire is the live wire, the black wire is the neutral wire, and the yellow wire is the ground wire; the output is DC 24 V – the ground wire is embedded with a nail; the brown wire is the common positive terminal, the blue wire is the negative terminal for the red light, and the yellow wire is the negative terminal for the green light.)
125MM Round In Ground Light Product Installation
efore construction, confirm the site, place road cones and warning signs, and mark grooves for anchors, 125MM Round In Ground Light and cables as specified (anchor:125×125×55mm, light groove:550×550×80mm, cable trench:100×100mm). Cut the road surface, connect light grooves with cable trenches and remove debris. Lay wires and luminaires parallel to the trays. Connect cables to the control box and perform a DC24V power-on test (220V is prohibited to avoid burnout). After normal operation, connect power cords of 125MM Round In Ground Light to extension cords with staggered joints; each wire shall be tightly wrapped with waterproof tape for at least 10 turns. Protect the light-emitting surfaces, pour C40+ concrete and compact well. Clean up the site, close the control box and recheck everything.
125MM Round In Ground Light Batch Aging
125MM Round In Ground Light Usage Precautions
This product features an aluminum casing; heavy pressure should be strictly avoided to prevent damage to the casing. The device must be powered on only under the supervision of a qualified professional; do not disassemble or assemble the luminaire without authorization.
125MM Round In Ground Light Warranty Terms
• Warranty Period: 3 years; the warranty covers only the main unit of the lighting fixture; accessories are not covered; custom-made products are excluded.
• Return Method: Customer returns
• Scope of Exclusion: Malfunctions resulting from human-induced damage or natural disasters are not covered under the warranty.
• Logistics Note: The shipping cost for returned items shall be borne solely by the shipper.
| Product Model | WDM-DMDD-D125-RG |
|---|---|
| Product Name | Underground Pile Light |
| Product Dimensions | 125*125*60mm |
| Shell Material | Cast Aluminum |
| LED Composition | 60° LED |
| Face Shield | Transparent |
| Single Brick Load Capacity | More than 20t |
| Working Voltage | DC24V |
| Average Luminous Intensity | ≥5000cd/㎡ |
| Visibility Distance | 20 – 300m |
| Operating Temperature | -40℃ ～ +65℃ |
| Relative Humidity | 10% – 95% |
| Insulation Index | >1500V |
| Ground Current | ≤3mA |
| Average Fault-Free Time | ≥10,000 hours |
| Service Life | ≥100,000 hours |
| Uniformity | Brightness Uniformity |
| Protection Grade | IP65 |
| Installation Method | Underground |
| fittings of a machine | quantity | Note: |
| Circular underground red and green stakes | 1 unit | Red/Yellow/Green – meeting various warning requirements across different scenarios |
| certificate | 1 piece | As a material release certificate |
| product specification | 1 piece | Includes product technical specifications, illustrated installation steps, and a safety and maintenance guide. |
